Eliminator 30

Eliminator 30

Eliminator-30 is the world’s leading fully autonomous high-payload agricultural UAV system that can be used to perform pesticide and liquid fertilizer spraying along with other agricultural aerial missions. With powerful variable water pumps, the E30 can pump out 30L of liquid under 7.5 minutes with precision flow control. By water-cooled centrifugal nozzles, nebulized liquid can be pushed much further into plants and even the back of leaves with strong downward airflows generating by the propellers.

 

Integrated flight control

IntelliSense & Feedback

Water-cooled centrifugal nozzle

High-efficiency spreading

IP67 Immersion waterproof

Large flow double impeller pump

Applications

Wildlife Monitoring

Search and Rescue

Flood Investigation

Border Protection

Precision Agriculture

Solar Panels Inspection

Bridges and Pipeline Inspection

Power Line Inspection

First Responding

Features

Smart Flight Control & Auto Pilot

Sentinel X6 Pro supports 1-click take-off and auto mission. Can be controlled by remote controller and/or ground station, increasing usability and decreasing flight training time and costs.  

The flight control system supports multiple flight modes – GPS (Loitering), Auto Mission, Guided (point-and-fly), Following, and Auto-return.  With clicks on tablet screen, Sentinel X6 Pro can immediately fly to or circling around points-of-interest.  In case of data link loss or low battery, Sentinel X6 Pro can automatically return to launch site or rally points without manual controls.  Failsafe (auto return) features can be disabled for sensitive/critical missions.

DRONE SYSTEM

Unloaded Spraying drone weight (without batteries)
29.8kg
Unloaded Spraying drone weight (with batteries)
40kg
Unloaded Spreading drone weight (without battery)
30.5kg
Unloaded Spreading drone weight (without battery)
40.7kg
Max Take-off weight
70kg
↑ (The weight parameters vary by ±1kg according to the final product configuration.)
Wheelbase
2025mm
Expand Size
Spraying drone:2435*2541*752mm
Spreading drone:2435*2541*774mm
Folded size
Spraying drone:979*684*752mm
Spreading drone:979*684*774mm
Working temperature
0-40℃

SPRAYING SYSTEM

Spaying tank
30L
Water Pump
Volt:12-18S Power:30W*2 Max flow:8L/min*2
Nozzle
Vollt:12-18S Power:500W*2 Atomized particle size:50-500μm
Spray width
4-8m

SPREADING SYSTEM

Spreading tank
50L
Max load
30kg
Applicable granule
0.5-6mm dry solids
Spread width
8-12m

MOTOR SYSTEM

Model
11115
Volt
14S
KV
95kv
Maximum power
7350W
Constant power
2600w
Propeller size
43inch

FLIGHT CONTROL

Operating Voltage
12-80V
Working temperature
-10~60℃
RTK
Horizontal ±0.1m, Vertical ±0.1m
GPS
Horizontal ±1.5m, Vertical ±0.5m
Wind resistance level
Sustained wind:level 4, Gust:level 5

REMOTE CONTROL

Resolution
1080*1920
Display screen
5.5inch
Working time
12h
Charging time
5h(20W)
Control distance
3km(3mHeight without shelter)
Weight
850g

RECOMMENDED BATTERY

Volt
14S
Capacity
30000mah
Weight
10kg
  • No Payload: 17.5min(Test by 14S 30000mah)
  • Full Payload: 7.5min(Test by 14S 30000mah)

* Test conditions: